Russian
version
Addres:
453113, Russia. Republic of Bashkortostan, Sterlitamak, Sterlibashev Tract, 29

Phone:
+7(3473)26 60 41
Fax:
+7(3473)25 29 86


We are in social networks


Oil gathering and pumping unit USZN

SPECIFICATIONS:

Oil gathering and pumping unit USZN, is designed to: 
- Reduction of static pressure by the buildup of the repair oil pipeline area, allowed for the pumping unit PNU -3; 
- Filling with hydraulic liquid and hydraulic testing of oil transfer manifold of pumping unit PNU -3; 
-Emptying of oil transfer manifold from oil in the tank at the end of work on pumping; 
- To pump oil from the repaired section of the pipeline (in a container or in a trunk pipeline with a working pressure of 10 MPa);
- Pumping oil from the open excavation pits and injected into the trunk pipeline with a working pressure of 10 MPa; 
-Collection of oil spills from the relief, pits and injection into a nominal capacity; 
- Transport the collected oil to the disposal site; 
- Operation in hazardous areas, Class B-1g according to the rules of electrical facilities maintenance, the parameters of possible explosive mixtures of vapors of petroleum and petroleum-air category IIA, group T3 according to GOST 12.1.011-78, and without the presence of explosive and flammable environments. Climatic modification is special with the air temperature range from -55 º C to +40 º C. 
Climatic modification chassis KamAZ-6560 - with a special range of operating temperatures from -55 º C to +40 º C. 

Oil gathering and pumping unit USZN, is designed to: 

- Reduction of static pressure by the buildup of the repair oil pipeline area, allowed for the pumping unit PNU -3; 

- Filling with hydraulic liquid and hydraulic testing of oil transfer manifold of pumping unit PNU -3; 

-Emptying of oil transfer manifold from oil in the tank at the end of work on pumping; 

- To pump oil from the repaired section of the pipeline (in a container or in a trunk pipeline with a working pressure of 10 MPa);

- Pumping oil from the open excavation pits and injected into the trunk pipeline with a working pressure of 10 MPa; 

-Collection of oil spills from the relief, pits and injection into a nominal capacity; 

- Transport the collected oil to the disposal site; 

- Operation in hazardous areas, Class B-1g according to the rules of electrical facilities maintenance, the parameters of possible explosive mixtures of vapors of petroleum and petroleum-air category IIA, group T3 according to GOST 12.1.011-78, and without the presence of explosive and flammable environments. Climatic modification is special with the air temperature range from -55 º C to +40 º C. 

Climatic modification chassis KamAZ-6560 - with a special range of operating temperatures from -55 º C to +40 º C. 

Base

chassis KamAZ-6560 (8x8)

- engine

modes. 740.63-400 (Euro 3)

Manipulative crane unit

IM-12, 5/20.100.00 L

Injection pressure  

- discharge pressure, MPa

10

- volumetric flow rate, m ³ / hour

12,5

Submersible pump

ANP-50

- optimum feed, m ³ / hour

50

- pressure side, m

15

Hydrostatic testing unit on the basis of pump NSH-32

 

Vacuum unit based on vacuum-compressor

VK-3M2A "N"

Cistern

CVN-8

- capacity (total / working), m ³

8 / 7, 2

Pumped liquid

oil, petroleum, industrial water

Concentration 700-1050

Gross weight, kg, no more

30,750

Distribution of gross weight on chassis axle, kg

 

- through the forward axle

11010

- through the trailer bogie

19740

Overall dimensions, mm, no more

 

- length

11450

- width

2550

- height

3890

Crew, people

2